Does not fit, does not exist! Front door repair - made easy with Schüring repair locks.
In any case, this applies to the retrofit locks / repair locks from Schüring. If a door lock has to be replaced, it is often difficult or even impossible to find a new original lock or a suitable alternative - for example, because the model has been removed from the range or the lock type can no longer be precisely identified. The solution to this problem is a lock developed by Schüring, which is flexible both in the height of the lock and in the position of the bolts.
This is achieved by a three-part design: The main lock was designed to fit into existing sash openings, taking into account the backset. A toothed shoe at the ends of the short cuff of the main lock enables the attachment of additional or DK locking points, thus allowing further locking points in different lengths to be mounted to the main lock as round bolts, circular bolts, or roller or mushroom pins.
Retrofit lock round bolt
Technical data:
- 3-fold interlocking
- Robust surface available in SilverLine
- DIN direction independent and can be used for single and double-leaf doors
- Version with change
- Gauntlets in various widths and designs (16 and 24 mm U gauntlets)
- Forend extension or cover of the visible fitting channels
- Cuff caps: Perfect appearance and protection against dirt
- Offset latch can be used as an option : robust latch parts even with small axle dimensions
- Screw connections instead of rivets: easy upgrading and conversion
- Exactly fitting production through precisely matched components
- Version with 8 mm follower
- 92 mm (35 - 45 mm mandrel)
- Same connecting sleeves for top and bottom
- Freely selectable handle height
- Large variety of cutting options
Retrofit lock circular bolt
Flexible due to three-way split
- Semi-circular bolt made of high-quality steel (circular bolt), steel bolts or DK locks
- End position locking: Each locking point is individually secured
- Precisely fitting bearing of the square spindle
- Innovative locking technology for a good fit of the door, optimum noise protection and excellent thermal insulation: with the first key turn the circular deadbolts extend in a circular movement or the round bolts in a linear forward movement and ensure gentle leaf advance, with a further turn optimum tightness and undisturbed insertion of the central deadbolt into the striker is achieved. Closing with the round bolt is carried out in the same way, but the forward pull is somewhat less comfortable due to the smaller entry surface.
Technical data:
- Counter-rotating version for increased burglary protection
- 3-fold interlocking
- Robust surface available in SilverLine
- DIN direction independent and can be used for single and double-leaf doors
- Version with change
- Gauntlets in various widths and designs (16 and 24 mm U gauntlets)
- Forend extension or cover of the visible fitting channels
- Cuff caps: Perfect appearance and protection against dirt
- Offset latch can be used as an option : robust latch parts even with small axle dimensions
- Screw connections instead of rivets: easy upgrading and conversion
- Exactly fitting production through precisely matched components
- Version with 8 mm follower
- 92 mm (35 - 45 mm mandrel)
- Same connecting sleeves for top and bottom
- Freely selectable handle height
- Large variety of cutting options
Nachrüstschloss Zirkelriegel
Flexibel durch Dreiteilung
- Halbkreisförmiger Riegel aus hochwertigem Stahl (Zirkelriegel), Stahlbolzen oder DK-Verriegelungen
- Endlagenarretierung: Jeder Verriegelungspunkt ist einzeln abgesichert
- Passgenaue Lagerung des Vierkantstifts
- Innovative Verriegelungstechnologie für einen guten Sitz der Tür, optimalen Lärmschutz und hervorragende Wärmedämmung: Bei der ersten Schlüsselumdrehung fahren die Zirkelriegel in kreisförmiger Bewegung bzw. die Rundbolzen in linearer Vorwärtsbewegung aus und sorgen für den sanften Flügelvoranzug, bei einer weiteren Umdrehung wird die optimale Dichtigkeit und ein ungestörtes Einführen des Mittelriegels in das Schließstück erreicht. Die Schließung beim Rundbolzen läuft in der gleichen Weise ab, jedoch ist der Voranzug aufgrund der geringeren Einlauffläche etwas weniger komfortabel.
Technische Daten:
- Gegenläufige Version für erhöhten Einbruchschutz
- 3-fache Verriegelung
- Robuste Oberfläche in SilverLine lieferbar
- DIN Richtung unabhängig sowie für ein- und zweiflügelige Türen verwendbar
- Ausführung mit Wechsel
- Stulpen in verschiedenen Breiten und Ausführungen (16 und 24 mm U-Stulp)
- Stulpverlängerung bzw. Abdeckung der sichtbaren Beschlagkanäle
- Stulpendkappen: Perfekte Optik und Schutz vor Verschmutzung
- Abgesetzte Falle optional einsetzbar : robuste Fallenteile auch bei geringen Achsmaßmöglichkeiten
- Verschraubungen statt Vernietungen: einfache Auf- und Umrüstung
- Passgenaue Fertigung durch präzise aufeinander abgestimmte Komponenten
- Ausführung mit 8 mm Nuss
- 92 mm (35 – 45 mm Dorn)
- Gleiche Anschlussstulpen für oben und unten
- Frei wählbare Drückerhöhe
- Große Vielfalt an Ablängmöglichkeiten
